The PCI Utilities package contains various utilities dealing with the PCI bus. It includes `lspci' for listing all PCI devices (very useful for debugging of both kernel and device drivers) and `setpci' for manual configuration of PCI devices. The library (and therefore all the utilities) can access PCI registers either via the /proc/bus/pci interface present since Linux kernel 2.1.82 or via direct hardware access (for use with older kernels and for hardware diagnostics). It can also read and interpret register dumps printed by `lspci -x'.
DocumentationUser manpage included
released on 25 February 2017
|License||Verified by||Verified on||Notes|
|GPLv2orlater||Janet Casey||1 April 2002|
Leaders and contributors
Resources and communication
This entry (in part or in whole) was last reviewed on 2 March 2017.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the page “GNU Free Documentation License”.
The copyright and license notices on this page only apply to the text on this page. Any software or copyright-licenses or other similar notices described in this text has its own copyright notice and license, which can usually be found in the distribution or license text itself.